Hi Everyone
I'm facing a challenging issue with Denodo, specifically with the QLogic QL45212 and QL45262 50Gb Flex Ethernet Adapter. Denodo does not recognize the IPv6 address through these adapters, and I'm seeking assistance from the community to overcome this problem. Here are the details:
Description:
In my Denodo setup, I'm utilizing the QLogic QL45212 and QL45262 50Gb Flex Ethernet Adapters to establish network connectivity. However, when configuring these adapters within Denodo, it fails to recognize the assigned IPv6 address. Consequently, I'm unable to establish an IPv6 connection with Denodo.
Specific Problem:
The specific problem I'm encountering is Denodo's inability to detect or acknowledge the IPv6 address associated with the QLogic QL45212 and QL45262 50Gb Flex Ethernet Adapters. This limitation prevents me from utilizing IPv6 connectivity within my Denodo environment, which is essential for my requirements.
Troubleshooting Steps Taken:
I have already taken the following troubleshooting steps, but unfortunately, the issue persists:
Verified IPv6 configuration: I have confirmed that the QLogic QL45212 and QL45262 50Gb Flex [Ethernet Adapter](https://www.lenovo.com/au/en/c/servers-storage/networking/ethernet-adapters/) on my machine have valid and functional IPv6 addresses assigned.
Checked Denodo network settings: I have thoroughly reviewed the Denodo network settings to ensure that IPv6 support is enabled and correctly configured.
Tested IPv6 connectivity outside Denodo: I have successfully tested IPv6 connectivity on my machine using other applications and network utilities, demonstrating that IPv6 is functioning correctly.
Verified adapter compatibility: I have confirmed that the QLogic QL45212 and QL45262 50Gb Flex Ethernet Adapters are compatible with Denodo and the operating system on my machine.
Request for Assistance:
I kindly request the assistance of the community in resolving this issue specifically related to the QLogic QL45212 and QL45262 50Gb Flex Ethernet Adapters in Denodo. If any community members have encountered a similar problem or have any insights, workarounds, or solutions, I would greatly appreciate your input.
Furthermore, if you have any suggestions for troubleshooting, configuration changes, or specific settings related to these adapters that might help address this problem, please share them. Your guidance and expertise would be highly valuable in finding a resolution.
Thank you all for your time and support!
