The incremental mode is a subtype of the full cache mode. With this mode enabled, the queries to the view will be “incremental queries”. That is, the queries to this view merge the results obtained from the cache with the most recent data retrieved from the source. The main benefit of this mode is that the queries will always return fully up to date results without needing to retrieve the full result set from the data source, just the rows that are added/changed since the last cache refresh.
This cache mode provides the option Push down query conditions to the data source. With this option, the WHERE conditions of the queries that hit this view will be delegated to the source. This may improve the performance of these queries. However, the result may not include data that was modified since last cache refresh. This option is disabled by default.
To be able to use this mode, the view has to have a field that
contains when a row was last inserted/updated. For example, if the
view has a field
last_modified_date, you have to enter a condition
last_modified_date > '@LASTCACHEREFRESH'.
When executing the query, the variable
@LASTCACHEREFRESH is replaced
with the timestamp of the last time a query to load the cache was
executed and finished successfully.
As it is a variant of the full mode, unlike with partial mode, the cache of the view still needs to be loaded explicitly (i.e. you have to execute a query with the appropriate parameters to load the cache). In the same way, we recommend using Denodo Scheduler to preload the cache of these views because it provides a wizard where you can select the views whose cache you want to preload and how often.
Requirements a View Has to Meet to Support Incremental Queries¶
A view has to meet the following requirement to support the incremental cache mode:
This option is only available for base views.
The base view must have a primary key.
The base view has to have one or more columns that indicate when the row was added or updated.
Virtual DataPort must support pushing down to the source conditions over these fields that indicate when each row was added/updated.
At runtime, when a base view with incremental mode is involved in a query, the execution engine will send a query to the data source with a condition over these fields. For example,
SELECT * FROM customer WHERE last_modified > '<latest date when the cache of the view was refreshed>'.
If the base view does not support pushing down this type of condition to the source, this cache mode is pointless and you should probably either do not use cache or use cache full. The reason is that if the condition cannot be pushed down to the source, the source will have to return the entire result set and then, the Server will filter out the results. Although the query will return the right results, it makes this option pointless because it does not make the query faster, nor diminishes the amount of data retrieved from the source.
- The source cannot remove rows from the data; only add or update them. If rows are deleted in the source, the incremental queries will return the deleted rows until the cache of this view is invalidated and cached again. Many scenarios meet this requirement because rows are not actually deleted but instead, are marked as deleted or invalid.
How Incremental Queries Work at Runtime¶
When you query a view whose cache mode is incremental, the execution engine executes two queries:
- A query to the cache database.
- A query to the source with a WHERE condition like
last_modified > '<latest date when the cache of the view was refreshed>'.
Then, the execution engine processes the result as follows:
If the source and the cache return the same row, it returns the row of the source.
If the source returns row but the cache does not, it returns the row of the source. This means that this row has been inserted after the latest execution of the cache preload query.
If the cache returns a row but the source does not, it returns the row of the cache. This means that the row has not been updated since the latest execution of the cache preload query.
This is why the queries to base views with incremental mode return the rows that have been already deleted from the source until the cached data is invalidated and loaded again. Virtual DataPort, just by executing a query, cannot differentiate the rows that have been deleted from the rows that have not been updated since the latest cache refresh.
A row from the cache and a row from the source are considered the same if the values of the primary key are the same.
Example 1 of Use of Incremental Queries (Salesforce)¶
Let us say that you store on Salesforce information about the support cases opened by customers. Using the Salesforce custom wrapper (downloadable from the Denodo Support Site), you have created two base views:
You can create the view support_case that is a join view of these two:
In this scenario, to speed up the queries to the derived view
support_case you can do the following:
- On the two base views (not on the derived one), set the cache mode to “full incremental” with the condition
last_modified_date > '@LASTCACHEREFRESH'
- Define a new job on the Denodo Scheduler to preload the cache of the two base views at night, when the load of the Server is low (e.g. at 1 AM).
During the day, when client applications query the view
support_case, the execution trace will be like the one below:
This execution trace shows that every branch of the main join is the result of another join. These other joins are the result of joining rows obtained from two places:
- The source (the green boxes): the result of querying Salesforce with
last_modified_date > '@LASTCACHEREFRESH'.
- The cache database (the blue boxes): the data stored in the cache database.
This query returns completely up-to-date data in much less time.
Example 2 of Use of Incremental Queries (Google Drive)¶
In this example, we are going to retrieve information about the documents stored on a Google Drive account. To do so, we will create a JSON data source that connects to the URL https://www.googleapis.com/drive/v2/files.
With this service, you can add a condition to the URL with the parameter
modifiedDate, which indicates the last time a document was modified.
The interpolation function
ExecuteIfIsNotNull makes that when the
base view of this data source is queried, the data source will only add
q=modifiedDate... to the URL when the interpolation
lastmodified is not null. By doing this, we are making this
variable optional, so we can execute the view to retrieve all the files
from the source.
When creating the base view over this data source, in the “Configure
JSON Wrapper” dialog, enter the tuple root
After creating the view, you have to configure the cache of the view. To do this,
- Click Options
- Click the cache mode Full and select the check box Incremental.
- Click no condition (below the “Incremental” check box) and enter
lastmodified = '@LASTCACHEREFRESH'.
Note that this condition uses the equality operator. The reason is that we want to assign the value of the interpolation variable
@LASTCACHREFRESHto the interpolation variable
lastmodified. Once the cache of this view is preloaded, when this view is queried, the URL invoked by the execution engine will be like
That is, the comparison with the field
modifiedDatewill be done with the operator
- From the VQL Shell, execute this command:
CREATE OR REPLACE MAP i18n rfc_3339_utc ( 'country' = 'US' 'datepattern' = 'yyyy-MM-dd''T''HH:mm:ss.SSS''Z''' 'doubledecimalposition' = '2' 'doubledecimalseparator' = '' 'doublegroupseparator' = '' 'language' = 'en' 'timezone' = 'GMT' );
The datepattern attribute of this map is the pattern that the Google APIs use for date fields. This pattern represents:<year>-<month>-<day of the month>T<hour>:<minute>:<second>: <millisecond>'<time zone>'
Go back to the “Options” dialog of the view, click Search methods and in the Default i18n list, select
rfc_3339_utc(the i18n map created in the previous step).
At runtime, when the execution engine sends a URL to this source, it takes the value of
@LASTCACHEREFRESH, which is a date value and converts it to a string. It does so to replace
@lastmodifiedof the URL with this value. To convert this date value into a string it uses the date pattern of the i18n map of the view; in this case
rfc_3339, which is the pattern the Google Drive API expects for date values.